Today, Webb teams successfully deployed the observatory's secondary mirror support structure. When light from the distant universe hits Webb's iconic 18 gold primary mirrors, it will reflect off and hit the smaller, 2.4-foot (.74-meter) secondary mirror, which will direct the light into its instruments. The secondary mirror is supported by three lightweight deployable struts that …
While the Webb team was tensioning the sunshield, other activities were also taking place among the instruments. One milestone: unlocking the Mid-Infrared Instrument (MIRI) Contamination Control Cover. We've asked Gillian Wright, European principal investigator for MIRI, to tell us about it. "MIRI has a Contamination Control Cover, because the constraints of its extra-cold operating temperature …
As expected, the Webb original deployments timeline has changed over time. Sunshield tensioning was completed today, on the 10th day after launch. The secondary mirror deployment is now planned for tomorrow morning. Live coverage of the deployment, from the Webb Mission Operations Center at the Space Telescope Science Institute in Baltimore, Maryland, will stream on …
At approximately 11:59 am EST, the fifth and final layer of Webb's sunshield was fully tensioned, marking the completion of sunshield deployment. Read more about this key milestone in preparing Webb for science operations.
With three layers of Webb's sunshield fully deployed, the team commenced tensioning – that is, pulling each layer fully taut – of the final two layers this morning. We will have live coverage of the fifth layer tensioning at nasa.gov/live beginning at about 9:30 am EST.
The Webb team has completed tensioning for the first three layers of the observatory's kite-shaped sunshield, 47 feet across and 70 feet long. The first layer – pulled fully taut into its final configuration – was completed mid-afternoon. The team began the second layer at 4:09 pm EST today, and the process took 74 minutes. …
Today, at 3:48 pm EST, the Webb team finished tensioning the first layer of the observatory's sunshield– that is, tightening it into its final, completely taut position. This is the first of five layers that will each be tightened in turn over the next two to three days, until the observatory's sunshield is fully deployed. …
The Webb mission operations team began the first steps in the process of tensioning the first layer of Webb's sunshield this morning around 10 a.m. EST. It will take the team two to three days to tension the five-layer sunshield. The plan for today is to focus on the first layer, the largest and the …
Taking advantage of its flexible commissioning schedule, the Webb team has decided to focus today on optimizing Webb's power systems while learning more about how the observatory behaves in space. As a result, the Webb mission operations team has moved the beginning of sunshield tensioning activities to no earlier than tomorrow, Monday, Jan. 3. This will ensure Webb is in prime condition to begin the next major deployment step in its unfolding process. …
Work on the deployment of Webb's sunshield mid-booms went late into the night yesterday. Webb mission management decided this morning to pause deployment activities for today and allow the team to rest and prepare to begin Webb's sunshield tensioning tomorrow, Sunday, Jan. 2. That deployment is still expected to take place over at least two …
