4 min read
The Hubble Space Telescope’s Wide Field Camera 3 was brought back to full operational status and completed its first science observations just after noon EST today, Jan. 17. The instrument autonomously shut down on Jan. 8 after internal data erroneously indicated invalid voltage levels.
The Wide Field Camera 3 was installed on Hubble in May 2009 during the last servicing mission. It has taken over 240,000 observations to date and is the most used instrument of Hubble’s current complement.
For more information about Hubble, visit:
Jan. 15, 2019 - Hubble’s Wide Field Camera 3 to Resume Operations
NASA has moved closer to conducting science operations again with the Hubble Space Telescope’s Wide Field Camera 3 instrument, which suspended operations on Tuesday, Jan. 8. Today, Jan. 15, the instrument was brought back to its operations mode.
Shortly after noon EST on Jan. 8, software installed on the Wide Field Camera 3 detected that some voltage levels within the instrument were out of the predefined range. The instrument autonomously suspended its operations as a safety precaution. Upon further investigation, the voltage levels appeared to be within normal range, yet the engineering data within the telemetry circuits for those voltage levels were not accurate. In addition, all other telemetry within those circuits also contained erroneous values indicating that this was a telemetry issue and not a power supply issue.
After resetting the telemetry circuits and associated boards, additional engineering data were collected and the instrument was brought back to operations. All values were normal. Additional calibration and tests will be run over the next 48 to 72 hours to ensure that the instrument is operating properly. Further investigation using both the new and the previously collected engineering data will be conducted to determine why those data values were originally incorrect.
Assuming that all tests work as planned, it is expected that the Wide Field Camera 3 will start to collect science images again by the end of the week.
The Wide Field Camera 3 was installed during the last servicing mission to Hubble back in 2009. Over 2,000 peer-reviewed published papers have been produced from its data. Hubble itself is in its 29th year of operations, well surpassing its original 15-year lifetime.
Hubble operations, like other satellite operations, are excepted activities as defined in the NASA furlough/shutdown plan. The current partial government shutdown does not affect its flight operations.
For more information about Hubble, visit:
Jan. 11, 2019 - Update
NASA continues to work toward recovering the Hubble Space Telescope’s Wide Field Camera 3 instrument, which suspended operations on Tuesday, Jan. 8.
Shortly after noon EST on Jan. 8, software installed on the Wide Field Camera 3 detected that some voltage levels within the instrument were out of the predefined range. As expected under those conditions, the instrument autonomously suspended its operations as a safety precaution.
A team of instrument system engineers, Wide Field Camera 3 instrument developers, and other experts formed and quickly began collecting all available telemetry and onboard memory information to determine the sequence of events that caused the values to go out of limits. This team is currently working to identify the root cause and then to construct a recovery plan. If a significant hardware failure is identified, redundant electronics built into the instrument will be used to recover and return it to operations.
The telescope continues to operate normally, executing observations with the other three instruments — the Advanced Camera for Surveys, the Cosmic Origins Spectrograph and the Space Telescope Imaging Spectrograph — that are all performing nominally.
Originally required to last 15 years, Hubble has now been operating for more than 28. The final servicing mission in 2009, expected to extend Hubble’s lifetime an additional five years, has now produced more than nine years of science observations. During that servicing mission, astronauts installed the Wide Field Camera 3.
Hubble operations, like other satellite operations, are excepted activities as defined in the NASA furlough/shutdown plan. The current partial government shutdown is therefore not expected to have an impact on the recovery of the instrument to normal operations.
For more information about Hubble, visit:
Jan. 8, 2019 - Wide Field Camera 3 Anomaly on Hubble Space Telescope
At 17:23 UTC on Jan. 8, the Wide Field Camera 3 on the Hubble Space Telescope suspended operations due to a hardware problem. Hubble will continue to perform science observations with its other three active instruments, while the Wide Field Camera 3 anomaly is investigated. Wide Field Camera 3, installed during Servicing Mission 4 in 2009, is equipped with redundant electronics should they be needed to recover the instrument.
Contact:
Rob Gutro
Office of Communications
NASA's Goddard Space Flight Center, Greenbelt, Md.
robert.j.gutro@nasa.gov